The best solution is usually the simplest: apply a few coats of a rub-on finish that soaks into the wood, then reapply every 1–2 seasons. Products like Butcher Block Conditioner, Howards Feed & Wax, Teak Oil, or Boiled Linseed Oil are all good options. This kind of finish protects the damaged wood and can be wiped off the surrounding surface for a clean look.

The factory finish in your trailer is specially applied and is difficult to replicate without fully stripping and refinishing the piece. If the damaged wood is removable, we may be able to send a replacement or install a new one for you here at the Mothership.

If you want to refinish the piece to remove scratches or other damage, it’s best to remove it from the trailer first. Sand the surface with 150–220 grit to remove imperfections and create a smooth, even surface. Then apply thin coats of a protective matte-sheen polyurethane or clear oil, sanding lightly between coats with fine-grit sandpaper (220+).